KC_BigDog_51
Member
- Mar 25, 2001
- 262
- 0
Originally posted by Tree jumper
Lots of JB weld and duct tape couldnt keep the YZ from spewing its fluids all over the MX track for the group photo.
Originally posted by Tree jumper
I dont know where to start? First i lost some of my screws that hold on the plastic. It seemed like 1 for each piece was missing. I replaced them and locited the rest of them. Next was a seat bolt, Oh well the other one still held the seat down.
Then there was Thursday morning, I headed out the the GP track. As i rounded the 3rd turn i lost the chain roller. Flying into turn 4 i got alittle sideways and high on the bumpy section causing the chain to come off. It let some nice grind marks in the case and slammed the shifter lever down breaking out the bottom of the case, gouging the lever and bending the shifter shaft. Oil ran out the motor faster than hotdamn at the bonfire. :eek: Next comes the breaking of the exhaust bolt in the frame leaving it only connected at the motor and 1 bolt at the silencer.
Lots of JB weld and duct tape couldnt keep the YZ from spewing its fluids all over the MX track for the group photo. We almost got to findout if a screw driver handle makes a good chain roller. Well that's about it for me until i get the case split and see what esle i did to the bike.
Also lost my shower bag while it was sunbathing on the fence post!
:think
Originally posted by mx547
were you the one with the funnel and the bottle of oil? :scream:
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?