bocataking
Member
- Aug 30, 2005
- 17
- 0
So. . . this will be the first sort of repair/modification I try to make to my bike on my own, and it might be a stupid question, but better to blush a little now than end up with oil all over my friend's garage floor.
I will be installing a 10oz flywheel weight on my '96 CR250 this weekend and was wondering if I have to drain the oil out of the bike to do so - or could I just lay the bike on its side? I have always just assumed that there was oil on the other side of that cover, but being completely ignorant of motors, i could be wrong.
I have read the other threads about the actual installation but no one mentioned draining the oil so either its not an issue or its so elementary that no one needs include it. Which is it?
Thanks for your help.
I will be installing a 10oz flywheel weight on my '96 CR250 this weekend and was wondering if I have to drain the oil out of the bike to do so - or could I just lay the bike on its side? I have always just assumed that there was oil on the other side of that cover, but being completely ignorant of motors, i could be wrong.
I have read the other threads about the actual installation but no one mentioned draining the oil so either its not an issue or its so elementary that no one needs include it. Which is it?
Thanks for your help.