Reply to thread

Message: [QUOTE="phranticness, post: 1016231, member: 66089"] honestly I did not measure the powervalve componants. I installed them in the cylinder and moved them manually, they work freely. I read the spec on clearance with the piston, darn if I can remember what it was now, but I know that visually it had more clearance between the end of the valve and the piston than spec.It was at least .050. But the valve did kinna fit loose in it's bore. K I went riding after work again yesterday. I have to note that this noise is not getting louder or more pronounced, or happoning any more often. I also noticed that I can make it under decel compression braking. Again this is only intermittantly happoning. [/QUOTE]