Reply to thread

Message: [QUOTE="speedyts49, post: 667908, member: 32715"] I rechecked the float height, carb, reeds, and changed the pilot to a 45. The compression is 160psi which is good. I pulled the LSC off to check for black crud but found none. I still find what seems like a lot of gas in the intake boot and behind the reeds. Maybe thats normal, don't know. To check for a leak am i supposed to use wd40 and spray around the intake boot and head gasket with the bike running? Are there any other areas to check or sprays to use? Then will I see bubbles or hear the motor run funny if there is a leak? I have the air screw at 1 1/2 turns out. Its hard to adjust because of the surging etc. tom (i'm the one that smells like high test) [/QUOTE]