Reply to thread

Message: [QUOTE="speedyts49, post: 668140, member: 32715"] Today I put some pematex gasket sealer on the intake boot and a small bead on the head. I did not put any on the cylinder itself though. I decided to wait 24 hours to let the Permatex set before retrying the bike. I also re-cleaned the carb while I had it off and made certain nothing was wrong with the kips. I will look at the leakdown tester you mentioned and see if I can make one. I found one nut on the cylinder body that was a little loose. I don't have the correct tool to torque those nuts(not enough room). Maybe a crow foot? Thanks for your input, tom [/QUOTE]