Reply to thread

Message: [QUOTE="skipro3, post: 635474, member: 37632"] I have been doing some reading here and have found that some KDX riders have problems with their bike peeing (float bowl overflow) when leaned over. Suggestions to stop this is to set the float level lower so that the bowl doesn't fill to near capacity when upright and overfill when leaned over. Further searchs and reading suggest that jetting in all circuits are affected a lot by how the float level is set with a low float level making the bike leaner and a high float level making the bike richer. By a lot, the searchs say as much as 2 jet sizes. Is this true and if so, how does float level affect jetting on any circuit let alone on every circuit? [/QUOTE]