Reply to thread

Message: [QUOTE="Groove, post: 266038, member: 27837"] I would start by contacting a reputable bike suspension shop. They may advise you against it and be able to give you a reason or offer to service them. Since I did the work myself, I can't tell you what it should cost. Mine were notiably bent about 1/2 inch. I myself would not be concerned about fatigue of the metal. I assume you took a large hit to bend it. If you plan on doing it again, you may consider a larger diameter fork. But hey, if a shop charges you $40-50 to straighten a set of forks, it could save you a bundle. Ask around for a shop that has a press and a dial indicator and someone smart enough to know how to use them. It's easy enough to do. [/QUOTE]