Home
Basic Dirt Bike How-To's - Video
Dirt Bike How-To's - Video
Living The Moto Life - Video
Bike Tests | Shoot-Outs - Video
Forums
What's new
Latest activity
Log-In
Join
What's new
Menu
Log-In
Join
Navigation
Install the app
Install
More options
Close Menu
Forums
Dirt Bike Discussions By Brand
Canadian Daves JustKDX
Fork Springs -Need Some Help-
Reply to thread
Message
[QUOTE="canyncarvr, post: 142060, member: 16552"] [b]re: Thanks a mill for your instructions[/b] You bet. Glad to hear things are going ok. While the forks are upside down and draining, pump the piston rod to get all the old oil out. Not a bad idea to add a bit of clean oil, pump/drain summore. Also, when you put the new oil IN, do the same until you don't hear/feel any more bubbles squishing through the valve. Otherwise your oil level will be off. You can use a piece of rubber gas line tubing to hold the rod if you wish. When it comes time to put the spring in, the rod will stay extended if you tilt the fork about 45º. Otherwise, you'll have to have a piece of hose (or some similar rod extension) to keep it accessible after the spring is in the tube. TaDa! See! Jeff was right, huh? Piece'o-cake!! [/QUOTE]
Verification
Which ocean is California closest to?
Post reply
Forums
Dirt Bike Discussions By Brand
Canadian Daves JustKDX
Fork Springs -Need Some Help-
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Accept
Learn more…
Top
Bottom