Reply to thread

Message: [QUOTE="canyncarvr, post: 633368, member: 16552"] re: are you supposed to change.. Yes. The oem preload is probably incorrect for your situation. It's around 30-35mm!! Your fork sag should be in the 40-50mm range. You can get that with an[b] in[/b]correct spring choice AND an [b]in[/b]correct preload spacer. With the correct spring rate, the correct preload spacer will probably be quite a bit shorter. ...depends on the length of the spring, too...but that's kinda' another issue. [b]DO[/b] figure each spacer separately for each spring. It's not always true that a spring 'pair' is exactly the same length. A search for <preload><spring><fork> in this board over the last year got me 16 threads. Try it. ;) [/QUOTE]