Reply to thread

Message: [QUOTE="s10crazy, post: 761783, member: 53207"] Hey Micah, Cactus is right, in order to get the quality you're looking for you have to go with a 2 part base with base-coat hardener. You can buy this stuff at a auto supply store and if you have a spray gun it will turn out great. Your best bet for primer is going to be an epoxy primer which will give you not only a mechanical but a chemical adhesion as well. And putting 20 coats on isnt going to help at all its only going to hurt you because the more coats you put on the weaker your base will be. If you're using a base-coat clear-coat product you clear coat is going to be the protective part of your finish so also use a 2 part clear coat with hardener. I dont know about the aircraft paint but if it has a catalyst it may work. [/QUOTE]