Reply to thread

Message: [QUOTE="domino dave, post: 1363623, member: 46746"] For '89-'92 conventional forks Freddette says to remove the spring and compress the fork and then pour in the oil until it's 4.75 inches down from the top of the fork (for 200 lb riders. 5" for 150 lb riders). He says to mix 5 and 10 wt fork oils together for this. Then extend the fork and put in the new spring and place the pvc on top of it. Mark the pvc where the top of the fork is. then remove the pvc and mark 1/2" farther down on the pvc and cut it there. That will give you 1/4" of preload. Hope this helps ... Dave [/QUOTE]