Reply to thread

Message

[QUOTE="minidog, post: 562644, member: 31380"]
2002 kdx 200- new Freddette springs in with no instructions with them. Just looked thru sites for a couple of specific questions and couldnt find anything. Number 1 question;What is the recommended weight oil to use in forks for myself (150 pounds without gear, average rider). Number 2 queston; I dont understand where the preload spacers (pvc pipe) go. Pulled out old springs -pretty simple- but this has me a little baffled. Does the pvc go inside of the metal spacer with end caps on both ends (which would allow the metal spacer to flop up and down since the pvc is cut an extra 10mm for preload(?) or just cut pvc to length of metal spacer plus 10mm and leave out metal spacer alltogether.  Or am I just totally out of ballpark with my thinking. Tried calling Freddette Racing a couple of times with no one there by the time I get home to make the call. I understand everything else about the spring installation. This site has very good info and have learned quite alot but have searched with no results on these specific questions. Thanks again for your input.
[/QUOTE]

Verification

Which ocean is California closest to?