Reply to thread

Message: [QUOTE="JasonK94Z, post: 1434504, member: 124846"] Hi everyone. I just bought a 2002 KDX 220. I am going to have to respring the front and rear on this bike because i weight in around 230 lbs in all of my riding gear. Any suggestions for front and rear spring I will need would be appreciated. From past experience on my KLR650, Race Tech recommends springs that feel damn close to being solid rods of metal. :bang: Do I have to just measure front race sag, or am I supposed to just stick to a certain amount of preload by adjusting the preload spacer/pipe inside the forks? What rear sag? I plan to also do the shim mod on this bike's forks as well. I will be using Mobil 1 ATF (7.5 wt). Fill to 100 mm is what seems to be popular here? Thanks everyone. The bike is bone stock down to the filter. Next up will be a pipe and silencer if I can ever make up my mind which pipe to get. [/QUOTE]