gearbox woes

S

saab900aero

Member

Jun 20, 2009

12

0

• Jun 20, 2009

• #1

gday all, alex from australia.

just got my 99 kdx200 running with a fresh clutch and was running great until BANG!!! half a gear came flying though the bottem end casing.

so its safe to say im after a gearbox or bottom end for mine. what year range gearbox will fit the 99 models?? and where is the best place to find them??

cheers alex

 

C

cash_62

Member

May 13, 2009

27

0

• Jun 20, 2009

• #2

check ebay. yours should be able to use 95-03 engine cases. Same should go for tranny components as well. Anyone think/know differently?

 

J

julien_d

Member

Oct 28, 2008

1,788

0

• Jun 20, 2009

• #3

Yep, anything 95+ will bolt right up.

 

R

reepicheep

Member

Apr 3, 2009

670

2

• Jun 25, 2009

• #4

I had to replace my output shaft, and did some digging on the parts pages (i.e. servicehonda). I was able to work out that about 80% of the tranny is the same between the 1990 and the 1995 and up models. Somewhere at work I have a printout highlighted with the parts that are common...

So depending on which you need, that could be an option, and when I was lurking looking for the output shaft, the 1990 to 1994 trannsmissions were easier to find then 1995 and up.

 

S

sr5bidder

Member

Oct 27, 2008

1,463

0

• Jun 26, 2009

• #5

ouch sorry to here that that would really suck