Reply to thread

Message: [QUOTE="roostafish, post: 478999, member: 16051"] jfitz, do yourself a favor and buy the $15 regulator. You can get them from any dealer and are come from MSR and Moose to name just two. They are extremely simple to wire up and are shunt regulators just like the stock one. Don't bother trying to make one, you'd need one heck of a zener diode to duplicate it and a dropping resistor to boot. I've tried to build these before, and they never are as good as just dropping $15 on a pre packaged unit that is weather sealed. If you're getting 28vac out of your lighting coil, it's good. [/QUOTE]