Reply to thread

Message: [QUOTE="SFO, post: 297268, member: 21864"] The future looks bleak. There are two ways to go about making your bike right. #1 is the hard way. Complete disassembly and cleaning and inspection. Motors don't like sand. It was the #1 reason we didn't sandblast heads when rebuilding them, you can't know for sure they are 100% clean. I would tear it down to the bottom end because cranks don't like sand either. I know this sounds extreme but it is the only way to have peace of mind. #2 sell it before it gets worse. [/QUOTE]