Reply to thread

Message: [QUOTE="1998RM250, post: 1421964, member: 99032"] Well I couldnt sleep tonight, so I decided to file about 1/16 or less off each side of both spacers and clean them up. I managed to tap it in place lightly, and it seems to pivot freely. PHEW! Only thing is the right inside bearing collar is longer then the left and sticks out about 1/4 inch or less where the motor fits inside the swingarm. These are the collars that came out the bike, so it has to fit together somehow? Will try in the am, thanks for all the help. [/QUOTE]