Reply to thread

Message: [QUOTE="jdbrusch, post: 202352, member: 25926"] [b]resister in cap[/b] The resister in the spark plug cap can be accessed by removing the brass fitting inside the boot.Pull the boot off the spark plug and look inside the boot end use a slotted screw driver and unscrew the brass fitting counter-clockwise,turn the boot upside dowm in your hand and the resister and a small spring will fall out.The resister can be replaced with either a piece of coat hanger or welding rod if you have it.In regards to the carb problem only one carb is use at low throttle,I cannot remember which one, I would check this one before taking them both apart, must be a jet or fuel passage blocked somewere. :think [/QUOTE]