Reply to thread

Message: [QUOTE="A-RustyDemon, post: 536100, member: 37443"] Well the first problem is... is that you are going at it from the wrong end of the silencer. To re-pack you remove the barrel and end cap as a unit. Look at the other end... see those screws. That's where you start... Remove them and the barrel should slide off. Then you remove the old fiber packing... wrap with new and slide back inside of barrel... I hope you didn't rip the screening for the spark arresto. And don't over wrap the baffle. ;)Good Luck. Oh and remember to replace the rivet that you drilled out. [/QUOTE]