Reply to thread

Message: [QUOTE="mxdj666, post: 1187926, member: 76555"] did you let the bike warm up before he went out and flogged it ? it looks to me like the piston expanded and stuck you can kinda see it was a 4 corner siezure. also if you installed a wiseco piston, heres what you have to do to break it in correctly this is what a wiseco rep told me . start it up and let it idle till it gets up to temp then shut it down and repeat the process 3 more times this is because the forged piston has a high silicone content in it and a fast expasion rate and i guess going through a few heat cycles must cure the piston from expanding to fast . oh and the only way you can find this out is if you call wiseco its not the instructions that come with the piston, which is kinda weird [/QUOTE]