Reply to thread

Message: [QUOTE="pro2k, post: 906976, member: 36481"] Can you overtighten the airbox to carb and the carb to case boots? I mean if you overtighten will the seal be deformed and air leaks occur?? Still trying to figure out my airleak problem. I took the reed valve cage out today and the gasket between the carb and valve was completely soaked with fuel. I know I torqued the bolts to specs (7lbs) so I am a little puzzled by this. I replaced the gasket with a new one and torqued the bolts to about 9lbs this time. Curious to see if this helps....... [/QUOTE]