help

Yea we do it, doesn't hurt anything.

The wrist pin is a good idea (oiling). Now as for the cylinder it can get complicated. There are two schools of thought on this, you decide. Your fuel carries all the lubrication your cylinder needs upon start up so it is not necessary, some might argue it would promote ring sticking due to too much oil in the rings. 2 strokes require the rings to "seat" to the cylinder walls and too much oil might prevent this. So, that is the other side of the argument. I offer this not to promote any sort of debate but to inform only.

Mark

Oil good

Use the same oil you mix in your gas, use it lightly, both bearings,wristpin,piston,cylinder.