Reply to thread

Message: [QUOTE="Jasle, post: 1243054, member: 26675"] if your going to change the rod bearing you might as well just order a rod kit. will come with rod, bearing, and the bushings that go on the sides. have it done professionally. yes there are those "special" tools you can do a job without. This is not one of them. If you happen to have a lathe lying around you can tru a crank yourself. but for the typical $40-50 you'd really kick yourself if you get the bike back together and it vibrates like heck. which is what it will do with a crank even a tad bit out of whack. I spent several years building motors for a living and it was more cost effective to have cranks rebuilt by the pro's. [/QUOTE]