Reply to thread

Message: [QUOTE="jaguar, post: 785112, member: 19340"] I know that most people don't know anything about electronics and are not able to even unsolder a part from the parts board. In that case just remove the silicone from around the parts, take the CDI to a radio/tv techincian, then ask him to test all the resistors and diodes. Then order from Mouser the SCR , capacitor (1.5uf), and project box and any parts that the technician found defective. Then when the parts arrive have the technician install them. Then put on a bunch of silicon, install it in the project box, and screw it in place. All done, good as new, and much cheaper than replacing the CDI with a new one! [/QUOTE]