Reply to thread

Message: [QUOTE="adam728, post: 1195887, member: 55463"] You can make some spacers to add more preload to the fork springs. My father added maybe ~1" long PVC spacers to my RT180 back in the day. I don't know how long you can go before getting into coil-bind issues. Another trick I've seen used by old-school guys is to cut some coils off the spring (effectivly making it a higher rate) and then making up the difference with a spacer. Again, I don't know how much room there is to get away with this in those forks. [/QUOTE]