Reply to thread

Message: [QUOTE="DannyMoto07, post: 1197396, member: 76870"] Ok, skip the pics, I got way too frustrated. I drained the fluid (BLAAACK) and re-filled with about 290cc of oil. Right away they felt stiffer... until I installed them back on the bike. They feel exactly the same as they did before the change. A TAD better, but not as stiff as I wanted... The main thing that's wrong is that when the forks compress and come back up if I try to immediately push them down again, there's about a 3" gap where there's almost NO resistance... basically only on the spring. Does this mean I should add more fluid to compensate for the difference? I may just try it to see what happens. Either this or try the spacer trick to make the spring-itself stiffer. Any ideas? Dan [/QUOTE]