Reply to thread

Message: [QUOTE="whenfoxforks-ruled, post: 1198107, member: 73147"] [url]http://www.cannonracecraft.com,The[/url] pvc thing usually worked,caps off and wheel suspended,is there a gap between where the bottom of the cap ends and the top of the spring,this distance plus a 1/2 inch and add spacers.Beware of spring bind,you still need a full stroke.Air caps were the rage in the late 70's,a schrader valve in the caps allowed you to fine tune the sag,just a few pounds.Then there is cannon,call them and get anything you want for whatever! [/QUOTE]