Reply to thread

Message: [QUOTE="muddy226, post: 925486, member: 46421"] If you don't want to cut off the old grips just apply lube (tyre soap is best) to the outside of the grips and then just peel them from the inner end. The instructuions for applying the new grips should be on the Renthal glue tube, but if they are not you just coat the bar with the glue and slide on the new grip with a turning motion to ensure a good spread of glue, stopping when the grip is home and the right way round. Then do not move or use the grip for at least eight hours. [/QUOTE]