Reply to thread

Message: [QUOTE="JT2Fast4u, post: 875385, member: 57953"] Ok, will today I took off the left side cover & sprayed some carb. cleaner around the crank seal & it didn't affect the engine speed at all. I also sprayed around the carb, cylinder & head gaskets & got the same results, nothing... I haven't taken the reed valve out yet thou (waiting on the gaskets for it), so I still don't know the condition of it. But, do you think this could be the problem then? One other thing I should mention is when I was starting the bike, to do the above tests, it wouldn't start at first. The plug wasen't even wet, so I unscrewed the float bowl drain screw, & had a few drops of fuel come out. But after tapping on the float bowl, it then started. I know for sure that the float height is right on the money. I must have checked it & re-checked it at least a dozen times during the past few weeks & I know everything in that carb is spotless too (I've cleaned it at least a half dozen times too). I even purchased another carb from ****, & put the best parts from both of the carb's into making what I thought was one "good" carb. But now I'm really stumped. Does anyone have any other suggestions, or ideas? I sure would appreciate it. Thanks.... JT2Fast4u [/QUOTE]