Reply to thread

Message: [QUOTE="helio lucas, post: 1357739, member: 78346"] my advice is: pull the cylinder and the head, lap them in some fine emery cloth (400-800) in a flat surface, like a glass,to be sure that the surfaces are flat!!! most likely , they aren´t after so much play with... :nod: and no 2 gaskets... about the neutral, will you be able to put it with the engine off? or just with the engine running? if it´s with the engine on and the bike still is the cluch that drags for some reason. off and it´s not the clutch. could you post some pictures of the head and cylinder? :cool: [/QUOTE]