Reply to thread

Message: [QUOTE="WR250Z, post: 111405, member: 16439"] My '95 wr250 was very smooth on the bottom to midrange. I had Boyesen power reeds stacked over top of the stock ones(mistake) and it smoothed the big hit out really well. A 12 oz flyweight, forget the reed spacer.....it didn't help mine at all but did move the carb boots enuf to make them slip off once in awhile. I installed the '97wr250 ignition which let it carburet a little better and also smooth out the bottom power. This is the same ignition as the same model yz250...the spark mapping is different...allegedly. I had a fatty pipe that seemed to help mostly from mid to top while the stock pipe will make it nastier on the bottom end. Adding an FMF S\A also helped smooth the hit and lengthened the lowend pull into the midrange. The bike was a yz4 eater and could put almost any 4stroke to shame in slow going. A truly versatile ride. [/QUOTE]