Reply to thread

Message: [QUOTE="keithb7, post: 1016793, member: 58846"] I found it! 2 of the 4 set screws that hold my Steahly Flywheel Weight backed out, ripped a cut around the plastic magneto cover down low and toward the front. 2 fly wheel set screws now need to be replaced, the holes cleaned up and re-tapped. A new cover, and I'm good to go. Darn it, I didn't find it though untill after I ripped the cylinder off and checked everything for wear. Oh well now I'm in this far I might as well re-ring the piston too. So now I wait for a gasket kit to come in. Yahoo. A cheap fix! Keith [/QUOTE]