Reply to thread

Message: [QUOTE="lorollinls, post: 1195263, member: 73852"] ya you could try leaning out the air screw 1/4 at a time until it stops or starts bogging on ya, then def turn back rich until it runs right again, but 1/4 should clean up the running abit and will prolly help you quit foulin plugs, if that doesnt work, maybe address the jetting further, if not going down to a BR8eg so it will be a little colder running plug so it should help, personally i would rather run the correct plug and make sure the jetting is on spot.... [/QUOTE]