Reply to thread

Message

[QUOTE="turbonetics88, post: 1108429, member: 72821"]
actually i have never check the float level before but i have done it on a previous bike so i know how to do it and the manuel will tell the proper height so thanks though i never really though of the float as the problem, so what else besides the level of it being wrong could maybe the problem, for example today i was riding and 1st and 2nd gear have NO mid range-top end power i give it gas then after about 1/4 throttle the bike just runs out of power and then i have to shift to 3rd to get more power and have it not bog down...i also forgot to mention that it has what looks like a CR 500 Pipe on it, it isnt a 250 pipe because it wraps around the frame more unlike a 250 pipe, i also have a 50 Tooth Renthal Rear Sprocket and a 13 Tooth Front Sprocket...so could that be more of a problem, from what i hear the bike was raced so i would assume that was the purpose for the sprocket and pipe but i think thats why i dont really have a powerband in lower gears, i have good low end torque but not a powerband
[/QUOTE]

Verification

Which ocean is California closest to?