Reply to thread

Message

[QUOTE="RJ-KDX, post: 519167, member: 33917"]
CC; Thanks again for the replies.

Didn't you mean the FRUSTRATION?

Braahp; Thanks also.  I was talking with a friend and we hit on plug heat ranges today.  As far as the gas is concerned, you must have read my post on the FRP site.  It's not that my bike needs it as much as I do.  I know most here poo poo on it, but I can feel a difference.

DVO; I'm not sure why everyone gets so upset when people run at ratios above 32:1.  This is my whole point to get my jetting SPOT ON.   :thumb:

Also to clear a few things up I WAS going to go to 50:1 and sort out the jetting(Amsoil rec.).  This has not happened.  Went riding on Sat., changed needle to a BEP, 3rd clip, new BR8ES, and still @ 40:1.  Ran out and did a plug chop and the plug was awfully white.  Not wanting to waste a good riding day, I put the R1173 back in, and off we went.  Throttle was a little boggy, but we had a good time.

Still open to suggestions.  BTW, whats the major difference on a EG plug as opposed to an ES?  Thanks, :eek:
[/QUOTE]

Verification

Which ocean is California closest to?