Reply to thread

Message: [QUOTE="Dan105, post: 595296, member: 34235"] Thanks Faded. Well my friend has a 01 and it runs perfect, I finally got ahold of him and have his jetting specs. He got all his carb info from manchester honda in CT. They have always had a race team and so they helped him out. I guess the hot setup is to run a kawasaki part, its the S-4 nozzle. So I should see that part by weeks end and im going down one size on the pilot with the AS 1 1/2 out and clip in middle with stock needle and stock 420 main. I am confident that with this setup my headaches are over. Ive been reading a lot on DRN about jetting the last few days and im beginning to understand carbs. thanks [/QUOTE]