Reply to thread

Message: [QUOTE="wake_rider, post: 1405635, member: 75633"] You don't need any type of kit, you just need to find out the stock sizes on the jets for that bike and buy a few sizes up and down from stock. They're good to have around... Almost any jet will be available at a local bike shop. Get your manual out and find the stock sized jets on that carb, then call a shop and have them set aside a few jets in steps up and down from stock on your main and pilot jets. You should be set for jet tinkering, and it's exactly that: Tinkering... You will not be able to have anyone correctly tell you the setup of jets for your bike, it's trial and error. [/QUOTE]