Reply to thread

Message: [QUOTE="Joburble, post: 1376184, member: 108776"] I know the oil thing may be confusing but you need a place to start, and that place IS the correct oil ratio. After that you work on jetting, again make sure you get very good or expert advice from someone who knows what they are doing. The silicone I was meaning was not the spray type but the RTV type (same as what is on there at the moment). In regard to the choke, I have never heard of the choke being turned left or right as the idle screw, I just don't think that is correct. Post a pic of the other side of the carb if possible, that's where the idle screw should be. [/QUOTE]