I'm asking for jetting specs for a 2005 KDX 220R with the following Modifications:
Pro Circuit Platnium 2 Pipe with Pro Circuirt Pc Spark Arrester
Boysean RAD Valve
Perferated Airbox Lid
Riding Conditions would be aggressive enduro riding
Air Temperature about 70 to 80 degrees F
Altitude 1000 Feet
The bike has A 42 PILOT JET and A 145 MIAN JET at the present time and needle clip is in the fourth notch.
The Air screw is set at the stock setting
I am currently running 40:1 BeNol Pre-mix with 93 Octane pump fuel.
Thanks in advance for the info.
Sport
Pro Circuit Platnium 2 Pipe with Pro Circuirt Pc Spark Arrester
Boysean RAD Valve
Perferated Airbox Lid
Riding Conditions would be aggressive enduro riding
Air Temperature about 70 to 80 degrees F
Altitude 1000 Feet
The bike has A 42 PILOT JET and A 145 MIAN JET at the present time and needle clip is in the fourth notch.
The Air screw is set at the stock setting
I am currently running 40:1 BeNol Pre-mix with 93 Octane pump fuel.
Thanks in advance for the info.
Sport
Last edited: