Kdx Front Wheel Spacer Stack

I just purchased an 02 kdx220. The bike has low hours but I always tear used bikes down to be sure of things. I found that the spacers in the front wheel were missing when I replaced the pads. I noticed that the rotor and caliper had some damage from running against each other. I called the former owner to see if he had the spacers and he claims the wheel had never been removed. I call the local shop and they say the manual shows no spacers? I have never seen a bike without them and the front wheel bearing stack is not clamped up which allows the wheel to justify over towards the rotor. Wondering what I got myself into with a kdx now. Does anyone have a decent picture of the wheel bearing/spacer stack up and or part numbers for the missing parts? Or am I just used to better designed machinery? I just sold my ktm520 thinking a light 2 stroke would be fun to have again. Any help would be great. Thanks, T

Thanks anyway

I could not get any parts to show as it just loops back to a main page. Surely someone out there has had the front wheel off of their kdx? All I need to know is if there are spacers or not. It does not make sense to have the sel ride up against the fork leg. I can only assume that the rube I bought the bike from took it apart and lost them. I will call a different dealership and see if they know anymore on spacers. If anyone out there has their front wheel off, please measure the diameter and length of spacers for me. Thanks a bunch, Tim

Other posts indicate the kdx front wheels are not centered between the forks? And also that there are spacers on both sides?

Thanks a bunch guys. I knew there had to be a spacer/bushing. This is the last used bike for me. Third in a row that was not maintained well at all. I just got done taking it to just the frame and engine and now everything has grease and a few new parts have been ordered. Thanks again, Tim