N NITROHEAD Member May 9, 2002 9 0 May 15, 2002 #1 Hey, I have a 1992 KDX200. The kick start swings out always. Is there any way to fix besides buying a new setup? thanks nick
Hey, I have a 1992 KDX200. The kick start swings out always. Is there any way to fix besides buying a new setup? thanks nick
A agitt73 ~SPONSOR~ May 11, 2000 1,078 0 May 15, 2002 #2 take it to a good weld shop they should know what to do
David Trustrum ~SPONSOR~ Jan 25, 2001 1,396 0 May 16, 2002 #3 Yes they will know to adjust the little screw in the back of the knuckle to pre-load the spring, which pushes on the ball into the detent of the pivot. Course you could do that yourself. . . ;)
Yes they will know to adjust the little screw in the back of the knuckle to pre-load the spring, which pushes on the ball into the detent of the pivot. Course you could do that yourself. . . ;)