I have check out the justkdx page on the conversion, (trashing the stock in favor of the aluminum kx 125) my question is, according to buykawasaki's overview the part number is the same for the lower assembly that mounts on the starter shaft as it is on the kdx, why wont this work, and why do we use the aluminum unit off a 89 125?
Let me reword that, (such a loser) anyway, the part number for a 1995 KDX, lower kick starter assembly is the same as a 95 KX125, so, why cant this unit just blot on the KDX? Perhaps the start is in to much a different shape, I dont know, to much thinking going on:think
Originally posted by teton Let me reword that, (such a loser) anyway, the part number for a 1995 KDX, lower kick starter assembly is the same as a 95 KX125.
The kickstarter shaft on the KX is smaller than the KDX's. I used the 89 lever after asking Jeff Fredette about it. It has held up really well so far.:) --Dan