Kickstarter Lever Removal...how?

J

JasonRan

Member

Jun 6, 2005

197

0

• Dec 17, 2006

• #1

I need to pull off my right side engine cover to fix my power valve assembly. The first step looks like removing the kickstarter lever. Simple enough...take off the nut and pull it off. Yeah right! That thing must have never been taken off because it is on there!!! Does anyone have advise on how to get it off without damaging the shaft? I tried some Liquid Wrench and taking a pry bar to it, but nothing. Any advice is appreciated!!!

Jason

 

0

04kdx200

Member

Mar 30, 2005

209

0

• Dec 17, 2006

• #2

Per Dirt Rider mag..... Loosen the lever nut/bolt slightly, then fold out the lever and use the nut/bolt like a puller....

 

M

mo2stroke

Member

Nov 29, 2006

3

0

• Dec 17, 2006

• #3

I had the same problem with mine. i used a gear puller on mine and it wouldn't move still although prob not recommended by others i used a propane torch and barely heated it i mean just warm to the touch and it broke free hope that helps ya

 

M

muddertrucker

Member

Aug 24, 2006

105

0

• Dec 17, 2006

• #4

If all else fails take the nut off and go riding. It should vibrate itself loose. Thats how I lost mine :bang: I'm glad I found it later on. :cool:

 

J

JasonRan

Member

Jun 6, 2005

197

0

• Dec 18, 2006

• Thread starter
• #5

Thanks for the info. I tried heating it, hammering on it, prying it...and still nothing. So I made a trip to Auto Zone and rented a puller. Got it home, put that sucker on the lever and had it off within 3 minutes. It makes a big difference having the right tools!