Reply to thread

Message: [QUOTE="Shaw520, post: 92327, member: 18459"] [b]OK[/b] Your right,...with some fancy millwork, you could cut the 520 cyl down to achieve 64mm's of stroke. Hmmm,... then why cant you just bore the 400 cyl to 95mm and install a 520 piston, providing the pin to piston dome is the same? The wrist pin [b]is[/b] the same,...The cylinder bolt pattern is the same, there should be enough meat in the 400 cyl. Hmmmm Let me try to find that old thread. [/QUOTE]