yzpowerband

Member
Feb 11, 2007
19
0
My 04 kx 125 keeps fauling plugs... So i bought a recommended br8eix plug for the bike and it was running very well.. Then when i started it up in my yard, i put it in first and it bogged out... so i checked the plug and there was very little oil on the plug.. so i put in a new one.. and it didn't start up.. Any help would be much appreciated.
 

hot125mod

Member
Jan 14, 2007
501
0
an 8 should be hot enough the ix is an iridium put a br8es or eg in you dont need the $11.00 iridium plug just to have it foul all the time. check the gap it should be between 0.024-0.026 but check your manual to be sure. Be careful not to stress the ground strap too much. a feeler gauge will work. :cool:
 

yzpowerband

Member
Feb 11, 2007
19
0
thanks dude, i put in a br 8 eg today and it didn't foul :), i also ordered a 37.5 and a 35 pilot jet. Im going to put in the 37.5 and hopefully it will make a difference.. think this is a good idea?


thanks for the feedback
 
Top Bottom