Reply to thread

Message: [QUOTE="ebeck, post: 1170450, member: 74219"] The KX250 shock works as well with the 01 swingarm and the revised 02 linkage. It fits but well see once I get it down if there is interference issues. Fingers crossed. It looks plumb crazy.;) [IMG]http://img232.imageshack.us/img232/318/picture004mediumyf0.jpg[/IMG] Notice the rear head stay. It has been cut off. [IMG]http://img473.imageshack.us/img473/8959/cc911btv6.jpg[/IMG] Here it is with the tank installed. No clearance problems. I have to clean up the casting with some sand paper from my material removal process. Do they make metal sand paper? [IMG]http://img129.imageshack.us/img129/7158/picture003mediumpl4.jpg[/IMG] That is it. All the major assemblies fit. All that is left is to weld on the motor mounts paint and reassemble. All of the fabrication is over basicly save the welding. The motor looks right at home in there huh? [IMG]http://img62.imageshack.us/img62/6465/picture006mediumum9.jpg[/IMG] [/QUOTE]