Reply to thread

Message: [QUOTE="kevkar, post: 1260917, member: 41870"] i just finished installing 2000 kx125 forks on my 96 kdx 200. firstly the steering stems had to be pressed out of both triple clamps, and the original kdx stem pressed into the kx lower clamp. not an easy chore as the stems have an internal circlip installed in them, next i had to machine a spacer to move the lower bearing into the proper location to take up for the thinner kx lower triple clamp, then i had to machine an upper bushing to install the top clamp to the kdx stem. the original kdx brake line fits well to acerbis fork protectors, and the kx wheel and axle is used also. kp [/QUOTE]