Reply to thread

Message: [QUOTE="motometal, post: 984735, member: 24727"] you'll want to find a way to wire/rig it so that the valve is open all the time, that is the flapper valve is "up" when looking at it through the exhaust port. The powervalve system on these is a poor design anyway in my opinion, I think you will like how it runs once you get the powervalve to stay open. The exhaust pipe that belongs with that cylinder probably has different specs, if you find a newer pipe (stock) it might give you a bit more power but not sure if it will bolt right up on the frame. Tempting to stick with the one you have unless you run across a newer one cheap. Silicone is your friend. [/QUOTE]