Reply to thread

Message: [QUOTE="Jaybird, post: 660817, member: 22283"] I have tried, but cannot for the life of me picture what you are trying to explain with the bottle. What does the bottle have to do with anything? If you shined the lazer through the plastic, is there any chance the light was slightly refracted? 7mm is quite a bit to be off and should have been easily apparent by eyesight that it was not in alignment. I would double check my method if I were you. I will stick to a straight edge running from the side of the rear to the front. Much easier and reliable. (no keen eyeing is involved, it either hits the side of the CS or it doesn't) A 50cent dowel rod or even a broomstick will do the trick. I won't take anything away from laser alignments though. I've done a few of them in my day. When warranted, they are the ONLY method to use. [URL="http://www.hamarlaser.com/systems/s600/600rotosys_3810.htm"]http://www.hamarlaser.com/systems/s600/600rotosys_3810.htm[/URL] ;) [/QUOTE]