Reply to thread

Message: [QUOTE="Gary B., post: 221775, member: 18040"] I just had a similar experience with a swingarm bolt. Wound up heating the bolt head with an oxy/acetelene torch, give the heat a chance to work down the bolt, expanding the sleeve ever so slightly, allow to cool, and out it came with a few light taps. You should probably replace the bolt after doing this, however, as I'm sure this messes with the hardness of the bolt. I gotta agree with the others on this, you really need to take these things apart at least once a year and then you don't have these problems.:debil: [/QUOTE]